Articles on: Yanet Retail Barcode Labels

Common Label Alignment Issues

Problem

The printed label is shifted, too high/low, too far left/right, or cut off.

Check 1 — Check the template size

Go to:
Templates → Open the template
Check the selected Paper Brand and Paper Model.
Make sure the dimensions match the physical label.

Check 2 — Check the element position

Select the element that is misaligned.
Check its:

X (in)
Y (in)
Width (in)
Height (in)

Adjust the position or size as needed.

Check 3 — Check printer paper settings

When printing, make sure the printer uses the same paper size as the template.

Check 4 — Check browser scaling

In the browser print window, check the print scale.
Avoid using a scale that changes the original label dimensions.

Check 5 — Print one test label

Print one label and compare it with the physical paper.
If it is still misaligned, adjust the template again and repeat the test.

Result

The printed content should stay within the correct label area.

Tip: If every label is shifted by the same amount, check the paper size and printer settings first. If only one element is misplaced, check that element's X/Y position.

Updated on: 18/09/2026

Was this article helpful?

Thank you!